• Sep 20, 2019 News!IJMMM Had Implemented Online Submission System, Please Submit New Submissions through This System Only!   [Click]
  • Feb 26, 2018 News!'Writing Tips' shared by Prof. Ian McAndrew!   [Click]
  • Sep 23, 2019 News!IJMMM Vol.7, No.5 has been published with online version.   [Click]
General Information
    • ISSN: 1793-8198 (Print)
    • Abbreviated Title: Int. J. Mater. Mech. Manuf.
    • Frequency: Bimonthly
    • DOI: 10.18178/IJMMM
    • Editor-in-Chief: Prof. Ian McAndrew
    • Co-editor-in-Chief: Prof. K. M. Gupta
    • Executive Editor: Cherry L. Chen
    • Abstracting/Indexing: EI (INSPEC, IET), Chemical Abstracts Services (CAS),  ProQuest, Crossref, Ulrich's Periodicals Directory,  EBSCO.
    • E-mail ijmmm@ejournal.net

Editor-in-chief
Prof. Ian McAndrew
Capitol Technology University, USA
It is my honor to be the editor-in-chief of IJMMM. I will do my best to work with the editorial team and help make this journal better.

IJMMM 2018 Vol.6(1): 8-14 ISSN: 1793-8198
DOI: 10.18178/ijmmm.2018.6.1.338

Comparison of Shear Design Models for Reinforced Concrete Beams Strengthened with Inorganic Matrix Composite Materials

Christos G. Papakonstantinou and Dimitris Bekiaris
Abstract—Externally bonded Fiber Reinforced Polymer (FRP) materials can be used to increase the shear strength of reinforced concrete (RC) structural members. These composite materials are typically based on organic matrices, which are used to impregnate the fibers and provide bond to the concrete surface. Existing analytical models were derived using experimental data from specimens strengthened with organic specimens. The aim of this study is to evaluate these models and verify if these models can be used also for specimens that utilize inorganic matrices. The methodology used in this study is based on a comparison of experimental values obtained from specimens strengthened with inorganic matrices to analytical values calculated using the aforementioned models. It is concluded, that most of the models for organic matrices can also be used for inorganic, but for a better correlation of results some adjustments are necessary.

Index Terms—Shear strengthening, FRP, fiber composites, rehabilitation, inorganic matrix.

Christos G. Papakonstantinou and Dimitris Bekiaris are with the Dept. of Civil Engineering, University of Thessaly, Volos, Greece (e-mail: cpapak@uth.gr; dimitrisbekiaris@yahoo.com).

[PDF]

Cite: Christos G. Papakonstantinou and Dimitris Bekiaris, "Comparison of Shear Design Models for Reinforced Concrete Beams Strengthened with Inorganic Matrix Composite Materials," International Journal of Materials, Mechanics and Manufacturing vol. 6, no. 1, pp. 8-14, 2018.

Copyright © 2008-2019. International Journal of Materials, Mechanics and Manufacturing. All rights reserved.
E-mail: ijmmm@ejournal.net