• Dec 29, 2017 News!The submission for 2018 2nd European Conference on Materials, Mechatronics and Manufacturing was over on December 25, 2017.
  • Dec 26, 2017 News!Vol.4, No.3 has been indexed by EI(Inspec)!   [Click]
  • Dec 26, 2017 News!Vol.4, No.2 has been indexed by EI(Inspec)!   [Click]
General Information
    • ISSN: 1793-8198
    • Frequency: Quarterly
    • DOI: 10.18178/IJMMM
    • Editor-in-Chief: Prof. K. M. Gupta, Prof. Ian McAndrew
    • Executive Editor: Ms. Cherry L. Chen
    • Abstracting/Indexing: EI (INSPEC, IET), Chemical Abstracts Services (CAS),  ProQuest, Crossref, Ulrich's Periodicals Directory,  etc.
    • E-mail ijmmm@ejournal.net
Editor-in-chief
Prof. Ian McAndrew
Embry Riddle Aeronautical University, UK.
It is my honor to be the editor-in-chief of IJMMM. I will do my best to help develop this journal better.

IJMMM 2018 Vol.6(1): 26-30 ISSN: 1793-8198
DOI: 10.18178/ijmmm.2018.6.1.341

Effect of sub-Zero Treatment on Ageing of Aluminium Composite

Ahmet Taşkesen, Sinan Aksöz, and A. Tamer Özdemir
Abstract—In this study, B4C reinforced 7075 Al composites were fabricated by cold and hot pressing of Al, Cu, Zn and Mg elemental powders. Two different reinforcement rates (10% and 15%) were used for the composites. In order to examine the structural and mechanical properties, different sub-zero and ageing processes were applied to the composites. Sub-zero and stepped ageing treatments were applied after solutionizing at 470 oC for different time periods. It was found that hardness of the composite was substantially increased and micro structure was changed. Findings show that, general strength of the material significantly increased particularly after solutionization process.

Index Terms—B4C, aluminium composite, sub-zero treatment, ageing.

The authors are with Gazi University, 06500 Besevler, Ankara, Turkey (e-mail: taskesen.a@gmail.com, sinanaksoz@gazi.edut.tr, 2007atam@gmail.com).

[PDF]

Cite: Ahmet Taşkesen, Sinan Aksöz, and A. Tamer Özdemir, "Effect of sub-Zero Treatment on Ageing of Aluminium Composite," International Journal of Materials, Mechanics and Manufacturing vol. 6, no. 1, pp. 26-30, 2018.

Copyright © 2008-2015. International Journal of Materials, Mechanics and Manufacturing. All rights reserved.
E-mail: ijmmm@ejournal.net