• Sep 20, 2019 News!IJMMM Had Implemented Online Submission System, Please Submit New Submissions through This System Only!   [Click]
  • Feb 26, 2018 News!'Writing Tips' shared by Prof. Ian McAndrew!   [Click]
  • Sep 23, 2019 News!IJMMM Vol.7, No.5 has been published with online version.   [Click]
General Information
    • ISSN: 1793-8198 (Print)
    • Abbreviated Title: Int. J. Mater. Mech. Manuf.
    • Frequency: Bimonthly
    • DOI: 10.18178/IJMMM
    • Editor-in-Chief: Prof. Ian McAndrew
    • Co-editor-in-Chief: Prof. K. M. Gupta
    • Executive Editor: Cherry L. Chen
    • Abstracting/Indexing: EI (INSPEC, IET), Chemical Abstracts Services (CAS),  ProQuest, Crossref, Ulrich's Periodicals Directory,  EBSCO.
    • E-mail ijmmm@ejournal.net

Editor-in-chief
Prof. Ian McAndrew
Capitol Technology University, USA
It is my honor to be the editor-in-chief of IJMMM. I will do my best to work with the editorial team and help make this journal better.

IJMMM 2019 Vol.7(5): 201-205 ISSN: 1793-8198
DOI: 10.18178/ijmmm.2019.7.5.459

Tool Characteristics for Better Performance in Machining OHNS Steel Using Tungsten Carbide Tool Inserts

Srikantappa. A. S, Shivakumara. C. M, and Adaveesha. B
Abstract—Turning Process is an important machining process in which cutting tool inserts remove material from the surface of a rotating cylindrical work piece. Machining of Oil Hardened Non Shrinking (OHNS) Steel is a challenge for production engineers in tool industry. In this research paper, a study on turning OHNS Steel using tungsten carbide tool inserts is made by varying depth of cut, feed rate and cutting speed one each at a time and keeping other two constant. The effect on process parameters like surface finish, material removal rate, tool wear, cutting force, thrust force and temperature distribution on tool tip are discussed.

Index Terms—Turning process, OHNS steel, Tungsten carbide tool inserts.

The authors are with Cauvery Institute of Technology, India (e-mail: srikantappaarakere@gmail.com, shivakumaracm@gmail.com, badaveesh@yahoo.co.in).

[PDF]

Cite: Srikantappa. A. S, Shivakumara. C. M, and Adaveesha. B, "Tool Characteristics for Better Performance in Machining OHNS Steel Using Tungsten Carbide Tool Inserts," International Journal of Materials, Mechanics and Manufacturing vol. 7, no. 5, pp. 201-205, 2019.

Copyright © 2019 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
Copyright © 2008-2019. International Journal of Materials, Mechanics and Manufacturing. All rights reserved.
E-mail: ijmmm@ejournal.net